Training ManualTroubleshooting
No GasSwitchesNo PowerNo KegsKegs EmptyFobs Empty
MDU Troubleshooting – MDU not dispensing any product
NOTE: that if half of the spouts are working and the other half are not, this will very likely be an empty keg.
No Gas Supply
Check that the gas supply is connected. Check the bottle has adequate gas levels. Check gas is turned on. Check secondary regulators are on.
No Power
Check all connections and plugs are made. Check Fuse switch is on and the LED is illuminated.
Kegs not Connected
Keg connector needs attaching to the keg.
Keg Empty
Replace keg and snap on keg connector.
Fobs are not Primed
Bleed all air out of the Fob and line from keg.
Switches to MDU are off
Switch on the desired product spout switches (once on and the push button is activated the LED will light up).
